ILA=0, BRE=0, DTO=0, ENDE=0, CMDE=0, SDD0MON=0, SD_CLK_CTRLEN=0, BWE=0, CRCE=0, CBSY=0, RSPTO=0, ILR=0, ILW=0
SD Card Interrupt Flag Register 2
| CMDE | Command Error Detection Flag 0 (0): Command error not detected 1 (1): Command error detected |
| CRCE | CRC Error Detection Flag 0 (0): CRC error not detected 1 (1): CRC error detected |
| ENDE | End Bit Error Detection Flag 0 (0): End bit error not detected 1 (1): End bit error detected |
| DTO | Data Timeout Detection Flag 0 (0): Data timeout not detected 1 (1): Data timeout detected |
| ILW | SD_BUF0 Illegal Write Access Detection Flag 0 (0): Illegal write access to the SD_BUF0 register not detected 1 (1): Illegal write access to the SD_BUF0 register detected |
| ILR | SD_BUF0 Illegal Read Access Detection Flag 0 (0): Illegal read access to the SD_BUF0 register not detected 1 (1): Illegal read access to the SD_BUF0 register detected |
| RSPTO | Response Timeout Detection Flag 0 (0): Response timeout not detected 1 (1): Response timeout detected |
| SDD0MON | SDnDAT0 Pin Status Flag 0 (0): SDnDAT0 pin is low 1 (1): SDnDAT0 pin is high |
| BRE | SD_BUF0 Read Enable Flag 0 (0): Disable read access to the SD_BUF0 register 1 (1): Enable read access to the SD_BUF0 register |
| BWE | SD_BUF0 Write Enable Flag 0 (0): Disable write access to the SD_BUF0 register 1 (1): Enable write access to the SD_BUF0 register |
| SD_CLK_CTRLEN | SD_CLK_CTRL Write Enable Flag 0 (0): SD/MMC bus (CMD and DAT lines) is busy, so write access to the SD_CLK_CTRL.CLKEN and CLKSEL[7:0] bits is disabled 1 (1): SD/MMC bus (CMD and DAT lines) is not busy, so write access to the SD_CLK_CTRL.CLKEN and CLKSEL[7:0] bits is enabled |
| CBSY | Command Sequence Status Flag 0 (0): Command sequence complete 1 (1): Command sequence in progress (busy) |
| ILA | Illegal Access Error Detection Flag 0 (0): Illegal access error not detected 1 (1): Illegal access error detected |